Kit Registration

ENTER KIT ID


Sample Kit

Select the sample type for instructions

Watch the video for detailed instructions on how to collect your saliva sample. Click here to view
Kit Content:
  • Welcome card
  • Saliva collection tube & funnel
  • 16-digit Kit ID and pre-addressed envelope
 
Step 1: Register your kit:
  • Insert the 16-digit Kit ID present on the box in the registration field present above this section.
  • In the next screen, enter your mobile number/email address for OTP verifications (Do check your spam folder for the OTP if not received in your inbox).
  • Follow the further steps as instructed and complete the registration.
  • After registration, please choose a preferred time slot for sample pick up by clicking on 'REQUEST SAMPLE PICKUP' button.
Important notes and precautions before you start collecting the sample:
  • Do not eat, drink, smoke, brush your teeth, or chew gum within 30 minutes before saliva collection. These actions may interfere with the quality and quantity of the sample.
  • Avoid swallowing. In case the stabilizing solution comes into contact with the skin or eyes, rinse thoroughly with water.
  • Note that the tube cap may pose a choking hazard to small children if swallowed.
 
Step 2: Follow the below instructions to collect the saliva sample:
  • Unscrew the cap from the tube while being careful not to spill the liquid and keep the cap to close the tube after sample collection.
  • Screw the collection funnel on to the tube gently. Avoid excessive tightening.
  • Start spitting into the Funnel.
    • Tip: If the saliva does not flow easily into the tube, unscrew the funnel partially to ease the flow.
  • Continue spitting into the funnel until the level of liquid in the tube (not including bubbles) reaches the 4ml line.
    • To stimulate saliva production, consider gently massaging the inside of your mouth with your tongue.
  • Unscrew the collection funnel, replace the tube cap tightly, and then discard the funnel.
  • Shake the collection tube well to mix the saliva with the solution.
  • Place this tube in the envelope addressed to Genessense provided in the kit for pickup.
Steps
Envelop Content:
  • Welcome card
  • 16-digit kit ID
Register your kit:
  • Insert the 16-digit Kit ID present inside the envelop in the registration field present above this section.
  • In the next screen, enter your mobile number/email address for OTP verifications (Do check your spam folder for the OTP if not received in your inbox).
  • Follow the further steps and complete the registration.
  • After registration, please choose a preferred time slot for sample collection & pick up by clicking on 'REQUEST SAMPLE PICKUP' button.
  • An experienced phlebotomist will be assigned from Genessense for the sample collection.
  • Be available at the mentioned location at selected time for our phlebotomist to collect your blood sample.
  • The phlebotomist will take the kit registration ID sticker and affix it to the blood sample vial.





Toll-free number: 1800 296 9696
Connect with us: